The turboMAG is equipped with a room-sealed combustion chamber and is thus independent of ambient air. The air/flue duct is fan-assisted. Therefore turboMAG does not need to be connected to a chimney and can be installed anywhere regardless of the amount of available space.
Maximum comfort - maximum safety
The turboMAG incorporates an automatic ignition device and a monitoring system for the main burner. The ignition works with a novel, sensible flow rate sensor (impeller with electronic sensor) which starts the apliance operation already at small water flow rates. You won't find any better! And thanks to its low noise level the turboMAG can be placed in the living area without problems.
Intelligent control: the outlet temperature
The turboMAG possesses an electronically controlled outlet temperature adjustment enabling the user to easily adjust the outlet temperature at a pushbutton. Once the temperature has been adjusted, it is held contant within the maximum appliance output range. At the same time, turboMAG simultaneously adapts the gas rate depending on the water flow rate. In case less water or lower temperature is needed, turboMAG automatically reduces the burner output. The water heater constantly modulates between 30% and 100% of its output and thus - producing as much heat as required with the minimum energy needed - it perfectly combines efficiency and comfort.
Flexibility from top to bottom
Thanks to a wide selection of air and flue gas accessories turboMAG is suited to meet all installation demands. Its vario elbow helps to easily level out an offset of up to 56mm. Air and flue gas tubes are available at 60/100mm diameter.